Let’s know about CAD Based Pattern Making for Polo-Shirt. CAD means computer-aided design. CAD is to create, modify, analyze, and make a design. A pattern is a copy of different parts of a garment caused by the garment CAD software “Rich Peace.” After sketching it, it is cut using the FoxFX tool. According to this Pattern, Cloth is cut by machine & then the garment is made. For this industrial production, different Patterns are made from different Size & a marker is made with these different Patterns for large-scale production.
Table of Contents
Objective
- To know about pattern making of a Polo-Shirt by CAD Software of ‘’Richpeace’’.
- To know about its importance.
- To know about Pattern making from CAD software.
- To know about pattern grading from CAD Software.
Pattern making Procedure:
Rectangle
↓
Finalneck drop
↓
Back neck drop
↓
Half neck width
↓
Shoulder width
↓
Shoulder slope
↓
Armhole Curve
↓
Waist & hem
↓
Separate front & back part
↓
Cut front & back parts for pattern making.
↓
Front & back Part Pattern symmetry
↓
Neck
↓
Placket
↓
Collar and Collar stand.
Measurement Chart for Polo Shirt
” M size”
1. ½ Chest width = 52 cm.
2. ½ waist width = 48 cm.
3. ½ hem width = 49 cm.
4. UPPER Chest width = 39.5 cm.
5. Measurement height = 17.5 cm.
6. Front length = 70 cm.
7. Back length = 68.5 cm.
8. Upper back width = 40.5 cm
9. Measurement height = 40.5 cm.
10. Shoulder width = 12.5 cm.
11. Shoulder slope = 3 cm.
12. UPPer Sleeve length = 20.5 cm.
13. Sleeve cap height = 12 cm.
14. Armhole dept = 23 cm.
15. UPPER arm = 21.5 cm.
16. Neck width Seam to seam = 18 cm.
17. Васк neck drop = 2 cm.
18. Front neck drop from HPS = 11.5 cm.
19. Collar length = 48 cm.
20. Collar width = 8 cm.
21. Placket length = 14 cm.
22. Placket width = 6 cm.
Working Procedure: (M size for Polo-shirt)
First, take a rectangle whose width is half of ½ chest and the length is front & back length, where half of ½ chest is 26 cm & the front length is 70 cm, and the back Length = 68.5.
Then take front neck drop & back neck drop 2 & 11.5 cm from HPS.
After that, half neckwidth is taken where half neck width is 10 cm.
Then take the shoulder slop 3 cm from HPS.
Before taking the shoulder slope, then take the shoulder width 12.5 cm.
After that take the armhole depth 233 cm.
Then make the armhole curve width the help of across the front point & across the back point.
Then take the ½ waist 24 cm & half of ½ waist 24.5 cm from HPS to bottom.
After that, separate the front and back parts. Cut front & back parts for pattern making.
Then make the front & back parts symmetry.
Then prepare the neck which length is 52 cm and a width of 4 cm.
Sleeve Preparation:
At first, take the rectangle whose length is 21.5 cm & width is 20.5 cm.
Then take the Sleeve Cap height of 12 cm.
After, that make the Curve.
Then take the sleeve hem is 17 cm.
Mirror the half-sleeve
Cut the Sleeve for Pattern.
Collar Preparation:
Length is 48 cm.
The width is 8 cm.
Then make the required shape.
Placket Preparation:
Length is 14 cm.
The width is 6 cm.
Then make the regained shape.
Mahedi Hasan working as an Executive in Fabric Marketing at Textile Suppliers Ltd. Graduated with B.Sc. in Textile Engineering. Before was a Top Rated content writer at Upwork, and Level 02 Seller at Fiverr, Level 02 Publisher at Ezoic. Very passionate about content writing, SEO practice, and fashion website designing. Highly Experienced fashion writer for the last 4+ years. Have extensive 7 years of experience in the wholesale clothing business.