What is Moisture Absorption and Perspiration Finishing Agent?

Md Mahedi Hasan

Last Updated:

Published:

Moisture Absorption and Perspiration Finishing Agent is suitable for the finishing process of cotton, polyester, cotton-polyester blend, viscous, nylon, acetate and fabrics. It provides the fabrics hydrophilic, excellent density and soft hand.

Characteristics of Perspiration Finishing Agent

Characteristics of Perspiration Finishing Agent
Characteristics of Perspiration Finishing Agent
  1. Enhance fabrics good moisture absorption, quick drying.
  2. Impart fleece and fleece fabrics a fuller feel.
  3. Give fabric softness and lubricity, reduce fabric scratches, creases, chicken paw prints.

Basic Properties:

Basic Properties of Moisture Absorption and Perspiration Finishing Agent
Basic Properties of Moisture Absorption and Perspiration Finishing Agent
  • Composition: high-molecular polymer.
  • Appearance: light yellow to yellow solid.
  • Ionic type: Non-ionic.
  • Solubility: Diluted with hot water at 90°C

Dilution method

water ⇒ stirring 80r/min ⇒ heating to 80 – 90°C slowly put S-100 ⇒ swelling ⇒ 75-80°C heat preservation mixing ⇒ cooling to 40°C ⇒ filter and release the material

Dilution method
Moisture Absorption and Perspiration Finishing Agent’s Dilution method step by step

Note: In the swelling process, there will be stratification phenomenon (S-100 floating in the upper layer, water in the lower layer), which is a normal phenomenon. After swelling, stirring and cooling will be uniform to below 65°C.

Application Process of Finishing Agent

Finishing agent application process is recommended to dilute S-100 to 10% solid content and use it according to the following process.

Application Process of Finishing Agent
Application Process of Finishing Agent

a. Dipping process: S-100 (10%) dosage is 1.0% to 4.0% (o.w.f) (room temperature – 50°C) impregnation (30 – 60min) ⇒ dehydration ⇒ drying (100-130°C) ⇒ shaping (160 – 190°C)

b. Padding process: The dosage of S-100 (10%) is 10 – 50g/L Dip rolling (residual rate 65-75%) ⇒ drying (100 – 130°C) ⇒ shaping (160 – 190°C)

c. Store: shelf life is 6 months (sealed in a cool, dry and ventilated place, keep the storage temperature ≤ 25°C and storage humidity ≤ 50%)

d. Packaging: It can be packed 25 kg/bag.

e. Transportation: It can serve as a general chemical.

Leave a Comment